[Fix] Configuration System Failed to Initialize (100% Working)

If a user wants to access a recently installed program on Windows, the error Configuration system failed to initialize appears on the screen. This type of error message refers to faulty file systems or incorrect setups. A pop-up notification like this one, as well as the error, can be fixed quite fast. 

The problem appears on your display at various times, including when the computer is rebooted, however, it is a typical fault that takes some configuration modifications and interference with other apps. Remove applications, update the OS to the most recent version and try one of the other methods to fix the Configuration system failed to initialize error.

Configuration system failed to initialize

Windows 10 is indeed an amazing operating system, however, it is not without limitations. An example of an error prompt that has been causing problems for Windows desktop users is the Configuration System Failed to Initialize error screen. An example of when you will see this issue is when you’re trying to restart a recently installed software or when you are going to open any old system after making specific updates. Because there’s no same reason why such an issue arises, you can fix it using several troubleshooting techniques.

1 5

There are several approaches to resolving the Configuration System Failed To Initialize error in Windows 10. 

It is suggested that you follow a few methods to fix this problem on a Windows 10 computer. You have to go through them individually, checking to see if the problem has been fixed after everyone.

Solving Methods for ‘Configuration System Failed to Initialize’

Method 1: Launch System File Checker 

With the release of Windows 10, Microsoft has included a program that allows users to inspect and repair all the file systems without the need for a third-party product or disk. To make use of the SFC tool, follow these steps. 

Step 1: To enter the quick access panel, tap Windows + X on your keyboard. 

Step 2: Search Command Prompt (Admin) then, double-click on it to launch the Command Prompt interface in privileged mode, as seen in the picture. 

Step 3: If you are prompted with a popup, select Yes

Step 4: A black and white screen will appear, into which you need to input the following command, after that tab on the Enter key, to complete the process.

sfc /scannow

2 6

Step 5: This procedure will take a long time, so make sure the confirmation counter of the display reaches 100 percent completion before proceeding. 

Step 6: Your system will recover all of the corrupted files from such a copy that was previously saved as a backup. Check to see whether the problem still exists after restarting your computer.

Method 2: Delete any previous configuration files that you have. 

Another method is to remove the configuration file regarding a particular application. The following are the procedures to take to delete an outdated configuration file:  

Step 1: To launch File Explorer, you have to tab the Windows key + E at the same time. 

Step 2: Go to the path listed below then remove the config file associated with the application.

C: \ Users \ username \ AppData \ Local \ appname

Step 3: After that, navigate to the path listed below then delete that configuration file for the same application that wouldn’t launch.

C: \ Users \ username \ AppData \ Roaming \ appname

Make sure to include the title of the application in the routes just above that mentions the app name. When you are unsure about the actual spelling of the application, you can leave it empty and the remaining of the program will display a listing of the applications installed on your computer. You have to double-click just on the program folder and afterward hit on “Delete config file” to remove it. 

Step 4: Open the app again to see if the problem has been fixed or not.  

Method 3: Update Drivers

For your program to communicate correctly with your computer, you have to first update all the drivers. By accessing the official websites of the manufacturers of every Hardware device on your computer, it’d be difficult to effectively update all of your drivers.  

Advanced Driver Updater, will check all of the hardware and current drivers of your system before downloading and installing the new versions. This is a fully automated process that just involves a few clicks or even can be planned even when you’re not around the computer. To use Advanced Driver Updater for your computer, follow these steps:

Step 1: First, you have to download and then, Install the Advanced Driver Updater.

Step 2: Open the program once it has been installed, but then just hit the Start Scan Now option.

3 6

Step 3: On the display, several driver problems will show. You have to hit on the Update Driver of every driver.

4 7

Step 4: Once you have completed updating all of your drivers, restart your computer. 

It is vital to maintain your drivers up to date to avoid experiencing problems when your computer is functioning. Drivers are the vital link that connects your device’s software as well as hardware. You will almost eventually face small troubles if you do not keep them up to date. Advanced Driver Updater is indeed an excellent type of tech that can check and find all driver errors, including those caused by missing, corrupt, or out-of-date drivers. With this program, you won’t have to be concerned about minor concerns such as sound, illustrations, touchpad, keyboard, and so on.

Method 4: View the configuration file for the Dot Net Framework.

Another way in resolving the configuration system failed to initialize error is to analyze the file type on your PC. 

Here are the actions to take to perform this: 

Step 1: Open the File Explorer panel on your computer. For this, simply tap on the Windows + E altogether from your keyboard.

Step 2: Now, you have to go to the path below. Just copy the path address into the File Explorer and press enter.

C: \ Windows \ Microsoft.NET \ Framework64 \ v2.0.50727 \ CONFIG

5 6

Step 3: Locate and update the config file for the application that was causing the issue when it was launched. 

It is important to note that one of the most excellent file editors available is Notepad++, a free tool that can assist you in completing this process. 

Step 4: When you have accessed the Config file, then you have to find Configuration as well as confirm that the second line has configSections as a child of Configuration.

6 5

Step 5: Delete anything else that may be between these lines then save this file. 

Check whether the configuration system failed to initialize error message is still displayed.


This error is very common for Windows 10 users. If you are facing this error, simply try the methods to solve this. The steps are very easy and quick to execute.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *