[Fixed] The Specified Module Couldn’t Be Found (100% Working)

|

The problem message appears most frequently during Windows startup as well as a warm-up, and it can also appear while operating with the other applications or when attempting to access the internet, among other things. This problem, like most Windows issues, can be triggered by a mixture of factors, such as a malicious attack, misconfigured system files, and other factors. 

This is an example of a Run DLL error message. It has something to do with DLL (.dll) files that are linked to the Windows Registry that is used to run actions that are processed by multiple programs at the same time.

The specified module couldnt be found 1

Errors with RunDLL are most commonly encountered when software is denied access to a particular piece of code. These problems can also be produced either by malware or another malicious software program. 

The problem is usually mentioned during System boot and whenever opening a specific software. The file is corrupted or missing. This is frequently caused by DLL files. 

This could be linked to problems in the Windows Registry which are the result of software that refuse to uninstall properly, for example. As a result, the following are the primary causes of this defect:

  1. .dll files that are corrupted or absent 
  2. Windows Registry items that have been corrupted. 
  3. Programs are being installed or uninstalled incorrectly. 
  4. Infections with malware. 
  5. Drivers who are out of date. 

The error message frequently identifies which device is experiencing problems as well as the full location of the filename of a File system. The fact that you have this knowledge makes it simpler to correct the problem you’re having. 

To resolve the error, you must first investigate the cause of the error as well as determine who is to blame. Typically, the warning includes very specific data about the issue, making it easy to determine which portion is not working correctly.

Usually, the error message includes a complete address to the File type or application which is unable to work due to a syntax issue. As a result, make a note of such a name then follow the methods provided here to properly resolve the error.

The Methods of Fixing “The Specified Module Couldn’t Be Found” Error

Method 1: Through Command Prompt

If you make any changes to the properties of your USB drive, this error message will appear. This is frequently the result of a virus, therefore if you’ve not already, I strongly advise you to check your USB drive for viruses. 

It can be difficult to resolve some System issues, specifically if there are faulty files as well as missing Windows documents, but it is possible. If you’re having problems correcting an error, your device may be partially corrupted. Running Restore, one toRestoro will scan the device and discover the source of the problem is highly recommended.

To modify the characteristics of your USB drive, perform the following steps: 

1. Scan your USB drive’s drive letter for errors. This can be accomplished by launching This PC. Make a mental note of such a letter that corresponds to your USB drive. However, the letter allocated to one may vary from the one allocated to you.

1 5


2. Start Command Prompt and run it as an administrator at this point. To do so, hit Windows Key + X to bring up the Win + X menu, from which you may select Command Prompt (Admin).

2 9

3. When the Command Prompt window appears, you must type attrib -h -r -s F:*.* /s /d into it. Make careful to change the character F with the character you received in. 

Step 1. In this case, you will receive a new character on your computer. It’s critical to use the right letters, however, if you unintentionally insert the wrong key, it could result in problems with your computer, so proceed with caution.

3 9

4. To execute the function, hit the Enter key. 

5. Exit the Command Prompt once the command has been run. 

After you’ve completed this procedure, you should always be capable of accessing your USB drive even without problems. 

In addition, some users have recommended transferring your USB drive’s data onto a computer’s hard disk and then using the Command Prompt for resolving the issue. Follow the following steps to accomplish this:

  1. Enter This PC and navigate to the location of your USB drive. Copy this using the menu that appears when you right-click on it.
4 11
  1. Copy and paste the contents of your USB drive into a folder on your computer’s hard disk. You can set up a new folder specifically for this reason.
  2. While holding down the Shift button on your keyboard, you have to right-click on the folder containing the files there on your USB drive. To generate a command window,
5 10
  1. The Command Prompt window will now open. When you’re finished, hit Enter to start the attrib -r -s -h /s /d  command with the parameters you specified.
6 8
  1. Exit Command Prompt once the command has been completed. 

The following tutorial will assist you in swiftly resolving any issues with the Shift key. 

You will easily access your backed-up documents without any problems at this point. It is necessary to reformat the USB drive as the final step in the process. Follow the steps given to accomplish this:

  1. To reformat a USB drive, navigate to This PC, find your USB drive, then, you have to right-click there and pick Format using the menu.
7 9
  1. Choose the formatting settings you want to use and then click the Start option.
8 9
  1. Let Windows 10 finish formatting your hard drive. 

After you’ve formatted your hard disk, you must be able to view it with no difficulties. 

The given module was unable to be located. 

You would be unable to access data on the Flash drive if you encounter a USB problem. Changes in the properties of my USB drive are effective in resolving the issue, so make sure to do that first.

Method 2: Scan for Malware

There are still multiple reports of people reporting the issue as a result of a Conduits or even another malware attack in their system. In some situations, malicious items may not be properly destroyed, and the resulting remnants may cause a variety of problems, such as the “The specified module could not be found” error message. You should use trustworthy anti-malware software on a regular basis a comprehensive system scan to accomplish this. 

There are a whole plethora of popular antivirus programs available, in addition here to the built-in Windows Defender protection program. So make your selection and thereafter scan the computer by selecting “Full scan” from the drop-down menu:

  • In the Windows search box, enter Security, and then choose Windows Security. From the drop-down menu, choose Virus & Threat protection. 
  • Select Scan choices from the drop-down menu.  
  • Click Full scan, and after that Scan Now from the drop-down menu.
9 9

Method 3: Delete all the Background Container Task

  • Use the Win + R keys from your keyboard to open a new window. 
  • Enter the command taskschd.MSC into the search box. 
  • Choose Delete from the Job Scheduler Library by right-clicking on the BackgroundContainer task once it has been selected from the Task Scheduler Library.
10 9

Method 4:  Stop the Function of .dll

Identifying which.dll file is generating the issue and halting its operation can be accomplished by completing the methods outlined below. For the majority of users, this should perform as an error fix: 

Step 1: To enter File Explorer, press the Windows key plus E. 

Step 2: When you’re in Folder Properties, select the View tab. 

Step 3: Locate and select the Hidden files and folders option from the drop-down menu. 

Step 4: Bring up a list of hidden files and folders. 

Step 5: Then locate and uncheck the option Hide protected operating system files (Recommended) that is listed.

Step 6: Now, click on the OK.

11 8

Step 7: Select Settings from the Start menu by selecting it with the right-click button. 

Step 8: Choose Recovery from the Update & Security drop-down menu. 

Step 9: Hit Restart now in the Advanced startup tab. Here on Choose an option page, click Troubleshoot and then, Advanced options and afterwar Startup Settings. Finally,  Restart to begin troubleshooting. 

Step 10: To activate Safe Mode with Networking when Windows has restarted, hit the F5 or 5 key on your keyboard. 

Step 11: You should log onto your computer as an administrator.

12 8

Step 12: By tapping the Ctrl+Alt+Delete (Ctrl+Shift+Esc) buttons altogether, you may launch the Windows Task Manager. 

Step 13: The Process tab should be selected. 

Step 14: Locate the items which are linked with the issue in the listing of tasks and hit End task and close the window.

13 8

Method 5: Run SFC Using Command Prompt

Another possible cause of the problem could be damaged file systems, which System File Checker can identify and correct. As a result, open Command Prompt and type the following commands to start the scan: 

Step 1: In the Windows search engine, type Command Prompt and otherwise cmd to find the command prompt. 

Step 2: Select Command Prompt from the context menu by right-clicking on it. 

Step 3: Run the program as an administrator. 

Step 4: As soon as the new window appears, type sfc /scannow into it and press Enter.

Step 5: Wait until Windows has completed the scan and has reported the results.

14 8

Method 6: Delete all the Registry Files

Making unauthorized changes to the Windows registry may result in lasting system harm if the changes are not implemented appropriately. As a result, you should proceed cautiously and also at your risk with the following step in this process. If you prefer to prevent the possibility of OS modification, you can use Reimage to clean up all of the faulty registry keys generated by malware, thereby resolving the error that you are seeing. 

You should make a backup of your Registry before continuing. Once you’ve completed the process, follow the given steps:

Step 1: To open the Run dialog box, press the Windows + R keys together and enter Regedit inside the box that appears. 

Step 2: Open the Registry Editor program. 

Step 3: Locate and delete all the following registry keys:

HKEY_LOCAL_MACHINE\\Software\\Microsoft\\Windows\\CurrentVersion\\Run
HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\CurrentVersion\\Run
HKEY_LOCAL_MACHINE\\Software\\Microsoft\\Windows\\CurrentVersion\\RunOnce
HKEY_CURRENT_USER\\Software\\Microsoft\\Windows\\CurrentVersion\\RunOnce

Step 4: Restart your computer if necessary.

15 8

Conclusion

After you carefully as well as attentively adhered to these steps, you would’ve been able to resolve the issue that resulted in the pop-up “The specified module could not be found.”

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *