[Troubleshooting] The Network Path Was Not Found (100% Working)

A “network path was not discovered” error notification displays when you try to connect to a network resource from a Microsoft Windows computer, such as another computer, mobile device, or printer. 0x80070035 is an error code. The computer is unable to connect to the other device via the network.

The Network Path Was Not Found

This problem can be caused by a variety of factors, but some common fixes can help you. So, to analyze and solve your problem, please try the procedures listed below.

How to Fix ‘Network Path Not Found’

Solution 1: Inspect the Shared Drive

Check whether the drive is shared as the first step in resolving the network path not found error.

Step 1: Right-click the drive you wish to access on the target computer and select Properties.

Step 2: To continue, go to the Sharing tab in the pop-up box and select Advanced Sharing.

image3 1

Step 3: Check the option Share this folder in the pop-up box and confirm the Share name. Then, to validate the changes, click Apply and OK.

image1 2

After that, you may see if the network path not found problem has been resolved.

Step 4: To open the run command, press the Windows key and R at the same time. In the search box, type the folder’s name and press Enter. You should now have proper access to this folder.

Solution 2: Ping the IP Address of the Target Computer

The second option is to double-check that the network channel is properly connected.

The tutorial is now available.

Step 1: On the target computer, press Windows + R to open the Run dialog, then type cmd in the box and press Enter to proceed.

image4 2

Step 2: To proceed, run ipconfig /all in the command line window and press Enter.

image5 1

Step 3: Next, scroll down to find the IPv4 address and write it down.

Step 4: In the primary computer’s Command Prompt, type the command ping IPv4 address of the target computer> and press Enter to proceed. Check to see if you will receive four confirmation responses or not.

Step 5: Run the Network Adapter Troubleshoot if you don’t receive the four confirmation responses. After that, restart the system to see if the path not found issue code 0x80070035 has been resolved.

Solution 3: Modify the Security Settings on Your Network.

If the first two procedures failed to resolve the issue, you should investigate whether the issue was caused by a problem with your network connection.

Step 1: Press the Start button, then type secpol.msc into the search box and press Enter.

Step 2: Then take the following steps: Security Options > Local Policies > LAN Manager authentication level for network security. Double-click the option to activate it. LAN Manager authentication level for network security

image7 1

Step 3: Select Send LM & NTLM-use NTLMv2 session security if negotiated from the drop-down menu. Then, to save the modification, select Apply and OK.

Solution 4: Reinstall the Network Adapter Drive

Reinstalling the network adapter driver is the fourth remedy to the network path not found issue.

Step 1: On the target machine, press Windows + R to open the Run dialog box, then type devmgmt.msc in the window and click OK to proceed.

Step 2: Expand Network Adapters in the pop-up window. Then right-click each adapter and select Update driver from the context menu.

image6 2

Then you can proceed by following the instructions. After that, restart your computer to see whether the network path not found issue has been resolved.

Solution 5: Reset TCP/IP

TCP/IP (Transmission Control Protocol) should be reset as a last resort. Although most individuals don’t need to know about the low-level technical intricacies of how an operating system works, power users like knowing about the advanced troubleshooting solutions accessible. Resetting the components of Windows that handle TCP/IP network traffic that operate in the background is a popular way to get around periodic difficulties with Windows networking. The process is described below:

Step 1: On the target machine, use Windows + R to open the Run dialog box, then type ncpa.cpl in the window and click OK to proceed.

Step 2: Right-click the network and select Properties from the drop-down menu.

Step 3: Select Internal Protocol Version 4 and double-click it.

Step 4: To continue, click Advanced… on the pop-up window.

Step 5: Select the WINS tab in the pop-up window. Then select Enable NetBIOS over TCP/IP from the drop-down menu. Finally, click OK to proceed.

Solution 6: Synchronize Time

Watches should be synchronized. When computer clocks are set to different times, strange system behavior can result, including network path was not found warnings. To avoid this problem, keep Windows devices on a local network synced using Network Time Protocol whenever possible.

Solution 7: Rebooting Devices

Restart all of your gadgets. Rebooting all impacted devices, including the host and client PCs, as well as the network router, may be beneficial. Cached data in one of the networking chain’s connections may stop the network transaction from completing successfully.

Conclusion

We have tried to solve the issue “the network was not found” in this article. So if you see this problem then you just need to calm down first and follow these steps and you might solve the problems easily. But if the problems still didn’t solve then take your PC to the nearest service center. We hope this article helps you.

Similar Posts

Leave a Reply

Your email address will not be published.